Reset

California Consumer Privacy Act Notice

Effective Date: January 1, 2021

This California Consumer Privacy Act Notice (“Notice”) provides additional information to California residents whose personal information is processed by Hangzhou Hikvision Digital Technology Co. Ltd. and its U.S. affiliates (collectively, “HIKVISION”) pursuant to the California Consumer Privacy Act (“CCPA”). If you are not a California resident, this Notice does not apply to you. Please visit the Hikvision North America Privacy Policy  for Hikvision US website and Privacy Policy for Hik-connect Services  (collectively “Privacy Policy”) for more information.
 

Categories of Personal Information Collected and Disclosed
 

During the preceding 12 months, HIKVISION has collected the following categories of personal information that are processed pursuant to the CCPA: (1) identifiers, such as your contact information and online account information; (2) Internet and electronic network activity information, such as information about your interactions with HIKVISION products, websites, mobile applications, and social media pages; (3) audio, electronic, or visual information; (4) geolocation data; (5) professional information; (6) education information; (7) inferences about you, including about your preferences; and (8) financial information and other information as described above that may be considered personal information under the CCPA. Please see the “What Information We Collect” section of the Privacy Policy for more information about our information collection practices.

We do not and will not “sell” personal information for purposes of the CCPA. As set forth in the Privacy Policy, we disclose personal information to third parties for business purposes, including but not limited to advertising, marketing, and other services performed on our behalf, to protect against fraud and malicious activity, and for other business purposes described in the Privacy Policy. During the preceding 12 months, we have disclosed each of the above-listed categories of personal information for such business purposes. In addition, your information may be accessible to third parties with whom you interact or direct us to share your information through our services.
 

CCPA Rights

 

The CCPA allows California residents to request that a business that collects consumers’ personal information give consumers access, upon a verifiable consumer request, in a portable and (if technically feasible) readily usable form, to the specific pieces and categories of personal information that the business has collected about the consumer, the categories of sources for that information, the business or commercial purposes for collecting the information, and the categories of third parties with which the information was shared. California residents also have the right to submit a request for deletion of personal information under certain circumstances, although there may be legal or other reasons that HIKVISION must retain your information consistent with California law. We will not discriminate against you for exercising your rights and choices, although some of the functionality and features available to you may change or no longer be available to you. Any difference in the services is related to the value provided.

Please submit your request by using the contact information available in the Privacy Policy. Once we receive your request, we may verify it by requesting information sufficient to confirm your identity. If you would like to use an authorized agent registered with the California Secretary of State to exercise your rights, we may request evidence that you have provided such agent with power of attorney or that the agent otherwise has valid written authority to submit requests to exercise rights on your behalf. We reserve the right to deny requests in certain circumstances, such as where we have a reasonable belief that the request is fraudulent.

 

 

 

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).