Video Access Control Terminal

Video Access Control Terminal

Hikvision’s DS-K1T50x Series video access control terminal is equipped with an HD camera (2 MP/1080p) and fingerprint recognition module (supporting 1:1 mode and 1:N mode). The DS-K1T50x Series supports multiple advanced technologies, including fingerprint recognition (DS-K1T500SF).

  • Supports TCP/IP, Wi-Fi Communication, and eHome Protocols
  • Maximum 32 GB, built-in microSD card
  • Mifare card
  • Door magnetic sensor 1, alarm input 2, tamper-resistant switch 1, exit button x 1
  • 12 VDC/1 A
  • -40° to 140° F (-40° to 60° C)
  • 10% to 90% (no--condensing)
  • 8.58" × 3.07" × 1.61" (218 mm × 78 mm × 41 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).