Secure Door Control Unit

Secure Door Control Unit

The DS-K2M060 Secure Door Control Unit is the interlayer between the access control terminal and the lock, including the door, the magnetic lock, the exit button, etc. It can be applied to keep the door closed if the door becomes damaged.   

  • RS-485 Uplink
  • Exit button x 1, lock x 1, door magnetic x 1, alarm out x 1 and Wiegand x 17 indicators (RS-485 communication status x 2, power supply x 1, exit button x 1, lock status x 1, door magnetic x 1 and running status x 1)
  • -22° to 131° F (-30° to +55° C)
  • 10% to 90% non-condensing
  • 1.89" × 4.53" × 0.98" (48 mm × 115 mm × 25 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).