Fingerprint Reader

Fingerprint Reader

DS-K1201 Series Fingerprint and card reader, designed with a 32 bit high-speed processor, contains the optical fingerprint recognition module. It communicates with access controller via the RS-485 protocol. And a built-in tamper-proof module helps to protect the card reader from malicious damage. The protective level is IP65, which is suited for outdoor installation.

  • Mifare Card Reader
  • Multiple Authentication Modes (Card, Fingerprint, and Card + Fingerprint)
  • Stores 5000 Fingerprints
  • Tamper-Resistant
  • 12 VDC ± 10%
  • -40° to 158° F (-40° to + 70° C)
  • 10% to 90% (non-condensing)
  • 2.44" × 5.20" × 1.73" (62 mm × 132 mm × 44 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).